EasyManuals Logo

Genesis GCD18BK User Manual

Genesis GCD18BK
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
English
18V Cordless Drill/Driver
Operator’s Manual GCD18BK
•Avoidaccidentalstarting.Ensuretheswitchisintheoffpositionbeforepluggingin.
Carryingpowertoolwithyourngerontheswitchorplugginginpowertoolsthathavetheswitch
oninvitesaccidents.
•Removeanyadjustingkeysorwrenchesbeforeturningthepower
tool on. Awrenchorkeythatisleftattachedtoarotatingpartofthetoolmayresultinpersonal
injury.
•Donotoverreach.Maintainproperfootingandbalanceatalltimes.Lossofbalancecan
causeaninjuryinanunexpectedsituation.
•Ifdevicesareprovidedforconnectionofdustextractionand
collection facilities, ensure these are connected and properly used.
Useofthesedevicescanreducedustrelatedhazards.
•Donotusealadderorunstablesupport.Stablefootingonasolidsurfaceenables
bettercontrolofthetoolinunexpectedsituations.
•Keeptoolhandlesdry,cleanandfreefromoilandgrease.Slipperyhandles
cannotsafelycontrolthetool.
TOOL USE AND CARE
•
Secure the work piece. Useclamporotherpracticalwaytoholdtheworkpiecetoa
stableplatform.Holdingtheworkpiecebyhandoragainstyourbodyisunstableandmayleadto
lossofcontrol.
•Donotforcethepowertool.Thetoolwillperformthejobbetterandsaferatthefeed
rateforwhichitisdesigned.Forcingthetoolcouldpossiblydamagethetoolandmayresultin
personalinjury.
•Usethecorrectpowertoolforthejob.Don’tforcethetoolorattachmenttodoa
jobforwhichitisnotdesigned.
•Donotusetoolifswitchdoesnotturnitonoroff.Anytoolthatcannotbe
controlledwiththeswitchisdangerousandmustberepairedorreplacedbyanauthorizedservice
center.
•Turnpowertooloff,anddisconnecttheplugfromthepowersourceand/or
batterypackfromthepowertoolbeforemakinganyadjustments,changingtheaccessories,or
storingthetools. Suchpreventivesafetymeasuresreducetheriskofanaccidentalstartupwhich
maycausepersonalinjury.
•Storeidletooloutofreachofchildrenandotherinexperienced
persons. Itisdangerousinthehandofuntrainedusers.
•Maintainpowertoolswithcare.Checkforproperalignmentandbindingofmoving
parts,componentbreaks,andanyotherconditionsthatmayaffectthetool’soperation.Aguard
oranyotherpartthatisdamagedmustbeproperlyrepairedorreplacedbyanauthorizedservice
centertoavoidriskofpersonalinjury.
•Userecommendedaccessories.Usingaccessoriesandattachmentsnot
recommendedbythemanufacturerorintendedforuseonthistypetoolmaycausedamageto
thetoolorresultinpersonalinjurytotheuser.Consulttheoperator’smanualforrecommended
accessories.
•Keepcuttingtoolssharpandclean.Properlymaintainedcuttingtoolswithsharp
cuttingedgesarelesslikelytobindandareeasiertocontrol.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Genesis GCD18BK and is the answer not in the manual?

Genesis GCD18BK Specifications

General IconGeneral
BrandGenesis
ModelGCD18BK
CategoryCordless driver drill
LanguageEnglish