English
1/2" Hammer Drill
Operator’s Manual GHD1275
Never hold the workpiece in your hand, lap or against other parts of the
body
Always position the cord away from the rotating bit and DO NOT wrap the
cord around your arm or wrist
When using the drill, DO NOT position yourself between the tool and a wall
or post
If the bit jams or binds in the work,
Do not use dull or damaged bits and accessories.
Do not use bits larger then those recommended
When removing the drill bit from the tool, avoid contact with skin
Wear cushioned gloves and take frequent rest breaks.
Use only percussion-type carbide tipped bits for hammer drilling
Check the tool and remove any chuck keys or adjusting wrenches before
switching the tool “ON”.
WARNING: Read and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
