Genesis GHD1275 User Manual

5
English
EXTENSION CORDS
Grounded tools require a three wire extension cord.








Guidelines for Using Extension Cords
 

 

 
SPECIFIC SAFETY RULES FOR HAMMER DRILLS
WARNING:DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT
SAFETY RULES. If you use this tool unsafe or incorrectly, you can suffer serious
personal injury!
• Hold the tool by insulated gripping surfaces when performing an operation





Always use safety glasses or goggles.



Wear ear/hearing protectors 


Hold the tool firmly 


Always be sure you have firm footing


Do not hold the tool or place your hands near the rotating chuck or drill bit.


Always check that the material being drilled is secure and clamped in place


Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Amperes
(At Full Load)
Extension Cord Length
25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 200 Feet
0–2.0      
2.1–3.4      
3.5–5.0      
5.1–7.0      
7.1–12.0      
12.1–16.0      
16.1–20.0      

Genesis GHD1275 Specifications

General

Brand	Genesis
Model	GHD1275
Category	Drill
Language	English