English
12V Lithium-Ion Impact Driver
Operator’s Manual GLID12B
SPECIFIC SAFETY RULES FOR CORDLESS IMPACT
DRIVERS
WARNING: DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT SAFETY
RULES. If you use this tool unsafe or incorrectly, you can suffer serious personal injury!
• Hold the tool by insulated gripping surfaces when performing an operation
where the tool may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the
tool “live” and shock the operator.
• Do not leave the tool running. Operate the tool only when hand-held.
• Be aware that this tool is always in an operating condition, because it does not
have to be plugged into an electric outlet.
• When operating the tool from an elevated position, be aware of people or things
beneath you.
• Always hold the tool firmly in your hands before switching the tool “ON”. The reaction to
the torque of the motor as it accelerates to full speed may cause the tool to twist.
• Wear eye and hearing protection. Always use safety glasses with side shields. Unless
otherwise specified, everyday glasses provide only limited impact resistance, they are not safety glasses.
Use only certified safety equipment; eye protection equipment should comply with ANSI z87.1 standards.
Protective hearing equipment should comply with ANSI s3.19 standards.
• Bits, sockets and tool get hot during operation. Wear gloves when touching them.
• Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule
will reduce the risk of personal injury.
• Always disconnect battery pack from tool or place the switch in the locked or off position
before any assembly, adjustments or changing of accessories. Following this instruction will reduce the risk
of serious personal injury.
• Do not place battery tools or their batteries near fire or heat. This will reduce the
risk of explosion and possibly personal injury.
• Never use a battery which has been dropped or received a sharp blow. A
damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
• Use designated battery pack (Genesis™ -Model GLAB12B) and charger
(Genesis™- Model GLACH12B) for this tool. Use of any other batteries may result in a risk of fire.
WARNING: Read and understand safety and operating instructions of
designated battery and charger before using this tool. This manual contains important
safety and operating instruction for battery charger.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER &
BATTERY
• Save These Instructions. This manual contains important safety and operating instructions for
your battery charger.
• Before Using the battery Charger, read all instructions and cautionary markings on (1) Battery
Charger, (2) Battery, and (3) Product using battery.
• Use only the charger which accompanied your product or direct replacements as listed in this
manual. Do not substitute any other charger.
• Do not recharge battery in damp or wet environments. Do not expose battery pack to
water or rain.
• Do not operate charger with damaged cord or plug. Replace immediately.
To Next Page
Loading...
Need help?
General
