Genesis GRS750 - Guidelines for Using Extension Cords; SPECIFIC SAFETY RULES FOR RECIPROCATING SAWS

5
English
Guidelines for Using Extension Cords
 

 

 
SPECIFIC SAFETY RULES FOR RECIPROCATING SAWS
 WARNING: DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT
SAFETY RULES. If you use this tool unsafe or incorrectly, you can suffer serious
personal injury!
• Hold the tool by insulated gripping surfaces 



Always wear safety glasses or goggles.

• Always hold the tool firmly. 
• Check your work area for proper clearances before cutting.

• Do not cut oversized workpieces.
• DO NOT cut nails or screws 


Before switching on the tool, be sure the blade is not contacting the
workpiece.
• Keep hands away from moving parts

• Always allow the blade to completely stop 

 WARNING: Read and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Amperes
(At Full Load)
Extension Cord Length
25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 200 Feet
0–2.0      
2.1–3.4      
3.5–5.0      
5.1–7.0      
7.1–12.0      
12.1–16.0      
16.1–20.0      