Genesis GPCS535CK - User Manual

5.8 AMP, 3 ½" PLUNGE CIRCULAR SAW KIT
WITH MITER BASE
Scie circulaire plongeante de 3 ½ po et 5.8A
avec base de guide d'onglet
Sierra circular de inmersión de 5.8 amp, 3 ½",
con escuadra angular
GPCS535CK
Operator’s Manual
Manuel d’utilisation
Manual del operario
888-552-8665
TOLL FREE
HELP LINE:
WEBSITE:
www.genesispowertools.com

Summary

5.8 AMP, 3 1;2 PLUNGE CIRCULAR SAW KIT WITH MITER BASE

GENERAL SAFETY RULES

WORK AREA SAFETY

ELECTRICAL SAFETY

PERSONAL SAFETY

TOOL USE AND CARE

SPECIFIC SAFETY RULES FOR PLUNGE CIRCULAR SAWS

Causes and Operator Prevention of Kickback

ASSEMBLY AND ADJUSTMENTS

CHANGING BLADES

Procedure for replacing the saw blade, including securing and alignment.

SETTING CUTTING DEPTH

Instructions on how to adjust the blade depth for accurate cuts and safety.

INSTALLING RIP GUIDE

MITER BASE ADJUSTMENTS

OPERATION

STARTING AND STOPPING THE TOOL

BLADE SELECTION

GENERAL CUTTING

POCKET CUTS

CUTTING PARTICULARLY TOUGH OR ABRASIVE MATERIALS

CUTTING WITH THE MITER BASE

CUTTING WITH RIP CUTTING TRACK (OPTIONAL)

MAINTENANCE

Genesis GPCS535CK Specifications