Need help?Do you have a question about the Genesis GMSDR1015LC and is the answer not in the manual?
General| Arbor Size | 5/8 inch |
|---|---|
| Blade Material | Carbide-tipped |
| Teeth | 24 |
| Motor Power | 15 Amp |
| Voltage | 120V |
| Bevel Capacity | 45 degrees |
| Blade Diameter | 10 inch |
| No Load Speed | 5, 000 RPM |
Provides guidelines for safe and effective use of extension cords with the tool.
Instructions for safely removing the saw and its components from the packaging.
Details on securely attaching the miter saw to a workbench or stand.
Information on connecting and using the dust collection system and bag.
Step-by-step instructions for attaching the table extensions to the saw base.
Guide on how to use the extension stop block for repetitive cuts.
Instructions for tilting the stop plate to maximize cutting depth.
Steps for adjusting the cutting depth using the control knob.
Procedure for adjusting the 0-degree bevel stop for accurate cuts.
Procedure for adjusting the 45-degree left bevel stop for accurate cuts.
Instructions for locking the cutting head for storage or transport.
Instructions for unlocking the cutting head for operation.
Overview of common operations and setup steps for the miter saw.
Method for cutting base molding by laying it flat on the table.
Method for cutting base molding by standing it vertically against the fence.
Instructions for cutting crown molding flat for 90-degree corners.
Instructions for cutting crown molding vertically against the fence.
Guidelines and warnings for cleaning the miter saw components.
Information regarding the tool's lubrication requirements.
To Next Page
