English
1/2" Spade-Handle Electric Drill
Operator’s Manual GSHD1290
• Do not use dull or damaged bits and accessories. Dull or damaged bits are more likely
to bind in the work piece.
•
Do not use bits larger then those recommended. They are more likely to jam, causing
loss of tool control and personal injury. Large bits may also overload the drill, causing motor and gear
damage.
•
When removing the drill bit from the tool, avoid contact with skin. Allow
sufficient time for the bit to cool down or use proper protective gloves to handle the bit or accessory. Drill bits
and accessories may be hot after prolonged use.
•
Wear cushioned gloves and take frequent rest breaks. Drills can generate
considerable vibration when in operation which may be harmful to your hands and arms.
•
Check the tool and remove any chuck keys or adjusting wrenches before
switching the tool “ON”. Keys and wrenches can fly off at high speed striking you or a bystander,
causing an injury.
WARNING: Read and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
