Genesis GV70 - Driving: Blind Spot, Driver Attention, and Cruise Control; Blind-Spot Assist, Driver Attention Warning, and Smart Cruise Control

DRIVING
Quick Reference Guide I 38
37 I Quick Reference Guide
GENESIS GV70
BLIND-SPOT COLLISION-AVOIDANCE ASSIST (BCA)
Blind-Spot Collision-Avoidance Assist is designed to help detect and
monitor approaching vehicles in the driver's blind spot area and warn the
driver of a possible collision with a warning message and audible warning.
In addition, if there is a risk of collision when changing lanes or driving
forward out of a parking space, Blind-Spot Collision-Avoidance Assist can
help avoid a collision by applying the brake.
1
2
3
Driver Attention Warning can help determine the driver's attention level
by analyzing driving pattern and driving time while vehicle is being
driven. Driver Attention Warning will recommend a break when the
driver's attention level falls below a certain level.
• With the engine on, select or deselect 'Driver
Assistance
→
Driver Attention Warning' from
the Settings menu to set whether or not to use
each function.
DRIVER ATTENTION WARNING (DAW)
Inattentive Driving Warning - If this is selected, Driver Attention Warning
will inform the driver the driver’s attention level and will recommend taking a
break when the level falls below a certain level.
Leading Vehicle Departure Alert - If this is selected, the function will
inform the driver when the front vehicle departs from a stop.
SMART CRUISE CONTROL (SCC)
Adjusting the vehicle speed
1. Push '+' switch
1
UP to increase cruising speed.
2. Push '-' switch
2
DOWN to decrease cruising speed.
NOTE: Quick push up/down will change speed by 1 mph. Holding
switch up/down will change speed by 5 mph.
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
Smart Cruise Control is designed to help
detect the vehicle ahead and help maintain
the desired speed and minimum distance
between the vehicle ahead.
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
To turn on SCC:
1. Press the Driving Assist button to
turn on SCC. The speed will be set to
the current speed on the cluster.
2. If there is no vehicle in front of you, the
set speed will be maintained, but if there
is a vehicle in front of you, the speed
may decrease to maintain the distance
to the vehicle ahead. If the vehicle
ahead accelerates, your vehicle will
accelerate.
To set vehicle distance
Each time the button is pressed, the vehicle
to vehicle distance changes as follows:
Distance 2
Distance 3Distance 4
Distance 1
To Cancel Smart Cruise Control
To temporarily cancel SCC
Press the switch or depress the brake
pedal to temporarily cancel SCC.
To turn off the SCC
Press the Driving Assist button to turn
SCC off.
1
2