GENESIS GV80
Quick Reference Guide I 03
FEATURES AND CONTROLS
You can start the vehicle using the Remote Start button on the smart key.
To start the vehicle remotely:
1. Press the door lock button on the smart key within 32 feet (10m) from
the vehicle.
2. Press the Remote Start button for more than 2 seconds within
4 seconds after pressing the door lock button.
3. The hazard warning lights will blink and the engine will start.
4. To turn off the remote start function, press the Remote Start button
once.
PANIC
REMOTE START
FORWARD
P
BACKWARD
P
Remote Smart Parking Assist
ACCESSING MECHANICAL KEY
1. Press the GENESIS text section of the
mechanical key to separate the two case
halves.
2. Remove the mechanical key from the case.
3. After use, reinstall the mechanical key in the
reverse order of removal.
Remote start using Smart Key (if equipped)
SMART KEY
LOCK
UNLOCK
P
P
HATCH
OPEN/
CLOSE
G
E
NE
SI
S
If the smart key does not operate normally or have a dead battery, you
can lock or unlock the driver's door by using the mechanical key.
GEN
ESI
S
1 2
2
1