Need help?Do you have a question about the Genesis Irid 300 and is the answer not in the manual?
General| Type | PC |
|---|---|
| Material | Acrylonitrile butadiene styrene (ABS), Steel |
| Form factor | Midi Tower |
| Side window | Yes |
| Product color | Black |
| Illumination color | Green |
| Maximum PSU length | 180 mm |
| Number of 2.5\" bays | 2 |
| Number of 3.5\" bays | 3 |
| Illumination location | Back, Front |
| Number of 5.25\" bays | - |
| Maximum CPU cooler height | 163 mm |
| Number of expansion slots | 7 |
| Maximum graphics card length | 415 mm |
| Supported motherboard form factors | ATX, Micro ATX, Mini-ITX |
| Power supply included | No |
| Power supply location | Bottom |
| Supported power supply form factors | ATX |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity | 0 |
| Supported HDD sizes | 2.5, 3.5 \ |
| Rear fans installed | 1x 120 mm |
| Front fans installed | 3x 120 mm |
| Top fans diameters supported | 120 mm |
| Front fans diameters supported | 120, 360 mm |
Weight and Dimensions| Depth | 466 mm |
|---|---|
| Width | 212 mm |
| Height | 467 mm |
| Weight | 6300 g |
Defines the primary materials used in the PC case construction, SPCC Steel and ABS.
Lists compatible motherboard form factors: ATX, micro-ATX, and mini-ITX.
Specifies the number of bays for 3.5" HDDs (3) and 2.5" SSDs (2).
Details I/O ports (USB 3.0, USB 2.0, HD Audio, Fan Control) and expansion slots (7).
Outlines supported fan sizes and radiator configurations for optimal cooling.
Specifies maximum CPU cooler height (163mm) and GPU length (415mm).
Details cable routing space (18mm) and dust filter locations (Bottom, Top).
Provides the overall dimensions (466x212x467mm) and weight (6.3kg) of the case.
Instructions for installing fans, including panel removal and airflow orientation.
Steps for installing Solid State Drives (SSDs) into their designated locations.
Guide for mounting Hard Disk Drives (HDDs) using screws and the drive tray.
Instructions for connecting front panel I/O ports to the motherboard.
Details the terms of the 2-year limited manufacturer warranty provided.
Warnings on product use, environment, handling, and avoiding damage.
Advises against rough handling and emphasizes keeping ventilation clear to prevent overheating.
Information on EU conformity, RoHS compliance, and WEEE symbol for proper disposal.
To Next Page
