Genesis RX85 RGB - Installation; Warranty

KEYS PROGRAMMING
Software allows to assign several dierent functions to each key such
as: single key, macro, multimedia or function key. To do so, you need to
tick OFF the box “Light” and click on the key which you want to
program. Select required function and press “OK” to conrm selection.
Then press “Apply” to save setting.
MACRO RECORDING
For macro recording please go to software and press “Macro” tab,
then select previous saved macro name or create new one by
pressing on symbol +. To start recording press “Record” and then
enter the key combination which you want to assign. To stop the
recording press “Stop record” and then press ”OK”. On the end press
“Apply” to save macro setting.
SAFETY INFORMATION
• Use as directed.
• Non-authorized repairs or taking the device to pieces make the warranty
void and may cause the product damage.
• Avoid to hit or friction with a hard object, otherwise it will lead to grind
surface or other hardware damage.
• Do not use the product in low and high temperatures, in strong magnetic
elds and in the damp or dusty atmosphere.
• Do not drop, knock, or shake the device. Rough handling can break it.
• Slots and openings in the case are provided for ventilation and should not
be obscure. Blocking the vents can cause overheating of the device.
GENERAL
• The safe product, conforming to the EU requirements.
• The product is made in accordance with RoHS European standard.
• The WEEE symbol (the crossed-out wheeled bin) using indicates
that this product in not home waste. Appropriate waste
management aids in avoiding consequences which are harmful
for people and environment and result from dangerous materials
used in the device, as well as improper storage and processing.
Segregated household waste collection aids recycle materials and
components of which the device was made. In order to get
detailed information about recycling this product please contact
your retailer or a local authority.
PACKAGE CONTENT
• RX85 RGB mechanical keyboard
• Quick installation guide
WARRANTY
• 2 years limited manufacturer warranty
REQUIREMENTS
• PC or PC compatible device with a USB port
• Windows® XP/Vista/7/8/10
SPECYFIKACJA
• Keyboard size
• Keys mechanism
• Connector
• Number of key
• Number of Multimedia keys
449 x 210 x 36 mm
Mechanical
USB 2.0
104
12
FEATURES
• High quality, durable key switches
• N-Key Rollover
• RGB backlight with PRISMO eect
• Gaming software with prole/macro editor
• „Double injection“ key caps guarantee lifetime resistance
against rubbing o letters
INSTALLATION
Connect your device to the USB port of your computer, it is necessary to wait about 15 seconds for the rst connection until the drivers
are fully installed. The keyboard includes software which allows you to set up advanced features, if you want to use these features, you
need to download and install the software from our website www.genesis-zone.com. Open the installation folder and then double-click
the setup.exe le. Follow the installation instructions. After a successful installation, the software icon appears on the main bottom
panel. Double-clicking the icon opens the settings interface.
Press the [FN + INS] keys to activate
“Spectrum” mode. Press the [FN + INS] keys
again and the backlight will stop changing
on selected color.
Press the [FN + End] keys to activate
“Custom” mode. Custom mode allows you
to set the individual illumination of each
key. Press the keys [FN + End] again to start
recording, LED indicator should start
ashing, then press the keys which you
want to illuminate. For each key, you can
choose one of seven predened colors to
set by pressing the selected button again
until the desired color appears.
BACKLIGHT BRIGHTNESS
To change the backlight
brightness level press keys
[FN + arrow Up/Down]
+
CHANGE OF BACKLIGHT COLORS
To change the backlight color,
press the keys [FN + arrow
Left/Right]
Note: This function is available
only in “Static” mode
+
Press the button to change between 9 backlight modes. You can also use follow combination of keys for activation of required mode:
BACKLIGHT MODES
Press the [FN + Home] keys to change
between modes: Explosion (Auto),
Explosion (Manual), Spread, Static.
Press the [FN + PgUp] keys to activate
“Wave” mode. Press the [FN + PgUp] keys
again and the backlight will stop changing
on selected color.
Press the [FN + Del] keys to activate “Prismo
eect” mode. Press the [FN + Del] keys
again and the backlight will stop changing
on selected color.
Press the [FN + PgDn] keys to activate
“Reaction” mode. Press the [FN + PgDn]
keys again to change color of backlight.
To adjust the backlight speed press
the keys [FN + -/=]
EN
PL
DE
ES
CZ
SK
RO
HU
BG
RU
To change the backlight moving
direction press [FN + arrow
left/right]