What to do if my Geniani G-1012-4LB Humidifier does not operate?
If your Geniani humidifier isn't working, make sure the power adapter is properly inserted. Also, check the water level in the water channel and fill the water tank if it's low. Finally, ensure the water tank is correctly installed.
Why is there water around my Geniani G-1012-4LB?
If you notice water around your Geniani humidifier, it might be due to high humidity or poor ventilation, preventing the mist from evaporating. Try turning down the humidification output, especially during sleep, or use an air conditioner or fan to improve air ventilation and enhance the humidifying effect.
What to do if my Geniani Humidifier has water in the tank but will not work?
If your Geniani Humidifier has water in the tank but isn't working, it might be tilted, causing a low water level in the water channel and triggering the low water level protection. Place the humidifier on a flat and solid surface to keep it stable.
Why does my Geniani G-1012-4LB Humidifier make an abnormal sound?
An unusual sound from your Geniani humidifier indicates that the device is not placed on a flat surface. Place it on a flat and solid place or on the floor and keep it stable.
General| Model Number | G-1012-4LB |
|---|---|
| Water Tank Capacity | 4 liters |
| Run Time | Up to 24 hours |
| Mist Output | Up to 300ml/h |
| Power Source | AC 120V, 60Hz |
| Type | Ultrasonic Humidifier |
| Features | Automatic shut-off, Night light, Adjustable mist output |
| Filter Type | Filterless |
To Next Page
