Genie CCTV LSM-413 User Manual

Copyright @ 2012 by this company. No. Part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system
or translated into any language or computer language, in any form
or any means. Electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of this
company.
I. Security notes
1
The unit is only suitable for indoor use. The heat being generated in the
unit has to be removed via air circulation. Therefore the circulation vents
in the housings must not be covered with any objects.
Do not insert or
drop anything into the air vents ! This could result in a short-circuit. If the
unit is used for purposes other than originally intended, if it is connected
in the wrong way or not repaired by authorized skilled personnel, there is
no liability for possible damage. Do not use any fluid, cleaning chemicals
or abrasive materials. If the unit is to be scraped then take it to the local
recycling plant for disposal. We do not accept any liability for the
following : a) If the unit is used for purposes other than originally intended.
B) If The unit is wrongly connected. c) If the unit is not repaired by an
qualified authorized engineer.
II. Application range
The LCD color monitors LSM-413 active matrix technology offer a sharp and
high contrast display. It can be universally used for Surveillance systems,
In-Vehicle Reverse monitoring systems or for Multimedia applications. The
additional Audio input enable sound reception via Headphones.
Page 1 of 6
SAFETY INSTRUCTION
1. Never push objects or spill any liquid of any kind into the unit.
2. Do not attempt to service this product yourself, as opening or
removing covers may expose you to dangerous voltage points or
other risks. Refer all servicing to qualified service personnel, if any
misuse mentioned above happened or any accident dropping,
miss-operations occurred.
3.
WARNING : DO NOT USE THE CHARGER TO POWER THE
UNIT. Serious damage will occur which will not be covered by the
warranty.
Page 6 of 6

Genie CCTV LSM-413 Specifications

General

Brand	Genie CCTV
Model	LSM-413
Category	Monitor
Language	English

Summary

Security Notes

Application Range

Safety Instructions

Handling and Liquid Spills

Never push objects or spill liquids into the unit to prevent damage or injury.

Self-Service Prohibition

Do not attempt to service the product yourself; refer to qualified service personnel.

Charger Usage Warning

WARNING: Do not use the charger to power the unit; serious damage may occur.

Technical Data

Power Operating and Connections

Initial Battery Charging

Charge the Li-ion Battery for one and a half hours before first use.

Monitor Placement in Bag

Attach velcros to monitor and place it correctly in the bag for stability.

Connecting Power Cord

Connect the battery to the monitor via the DC power cord.

LCD Monitor Operation and Connections

Controls and Input/Output Ports

Overview of monitor controls like brightness, color, volume, and various input/output connectors.

Connecting Peripherals

Instructions for connecting video sources, audio sources, power supply, and headphones.

Monitor Operation

Adjusting Display Settings

Adjust brightness, color, and volume for optimal viewing and listening.

Selecting Video Input

Select the correct video input source for the monitor display.

Energy Saving Li-ion Rechargeable Battery

Battery Charging Procedure

Charge the battery for 8-10 hours and switch off to avoid power drain.

Power Indicator Light

Understand the green LED indicates charger power, not battery status.