Need help?Do you have a question about the Genie 255CD and is the answer not in the manual?
General| Current | 0.5 A |
|---|---|
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Cut type | Straight cut |
| Noise level | 74 dB |
| Media weight | 80 g/m² |
| Basket volume | 12 L |
| Product color | Black, Silver |
| Shredding CDs | Yes |
| Working width | 220 mm |
| Shredding size | 7 mm |
| Shredding type | Strip shredding |
| Shredding staples | No |
| Security level (paper) | P-1 |
| Certification | CE |
| Harmonized System (HS) code | 84729080 |
Weight and Dimensions| Depth | 185 mm |
|---|---|
| Width | 300 mm |
| Height | 320 mm |
| Weight | 2400 g |
Prevent injury by keeping clothing, jewelry, hair, and small objects away from the feed slot.
Always keep fingers and hands away from the feed slot to avoid serious injury during operation.
Continuous shredding should not exceed 2 minutes; allow the motor to cool down between operations.
Always deactivate and disconnect the shredder before moving, cleaning, or emptying the waste basket.
Never leave the document shredder unattended, especially with children or pets nearby.
The device must not be operated if it has a damaged power cord to prevent electrical hazards.
The REV function rectifies paper jams, and the separate slot shreds CDs/DVDs and credit cards.
Shreds up to 7 sheets of DIN A4 (70g) paper, up to 22 cm wide; insert small sizes in the middle.
Steps to reset the overload guard: disconnect power, wait 15 mins, remove excess paper, use REV, then AUTO.
To Next Page
