Genie GWKIC-12 - User Manual

To Next Page

SUBMITTAL FOR CERTIFICATION

B8Q WKF99

A GARAGE DOOR TRANSMITTER

FROM

The Genie Company / GMI Holdings Inc.

22790 Lake Park Blvd.

Alliance, Ohio 44601

a wholly owned subsidiary of

Overhead Door Corporation

L.Chop Kramer

Sr. Engineering Technician

Phone (216) 821-5360

Date: Sept 15, 1999

Guidelines for this document were derived from the following sections:

2.1033 Application for certification

15.19 Labeling requirements

15.31 Measurement standards

15.33 Frequency range for radiated measurements

15.35 Emission Limits

Subpart C - Intentional Radiators

15.205 Restricted bands of operation

15.209 Radiated emission limits, general requirements

15.231 Periodic operation within the band

40.66 - 40.70 Mhz and above 70 Mhz

I certify:

1) That the enclosed data is an accurate and truthful representation of the product

as tested using ANSI 63.4-1992.

2) That the device meets all the requirements of 15.205, 15.209, and 15.231.

Note: Use View P

age Layout and Zoom to view pictures and tables.

Need help?

Do you have a question about the Genie GWKIC-12 and is the answer not in the manual?

Summary

Submittal for Certification B8 Q WKF99

Certification Compliance Statement

States that test data is truthful and the device meets FCC requirements 15.205, 15.209, 15.231.

Technical Report Overview

Wireless Keypad Installation Guide

Installation and Programming Overview

Installation Instructions

Step-by-step guide for mounting the wireless keypad and installing the battery.

Door Code Configuration

Determining Your Door Code

Process to create the door code from operator switch settings using Chart A.

Keypad Operation Procedures

Programming and Reset Procedures

Detailed steps for programming, changing PIN, resetting memory, and changing door code.

Keypad Operation Guide

Troubleshooting

Problem;Cause;Action Matrix

Lists common problems, their causes, and recommended actions for the wireless keypad.

Device Labeling and FCC Compliance

FCC ID and Operational Conditions

Report on Certification Measurements

Measurement Preparation and Personnel

Radiated Emissions Data

Scan and Measurement Results

Notes on Radiated Emissions

Measurement Calculation and Conditions