Need help?Do you have a question about the Genie Intellicode 1024 and is the answer not in the manual?
General| Brand | Genie |
|---|---|
| Model | Intellicode 1024 |
| Category | Transmitter |
| Language | English |
Identifies the learn code button and indicator on the power head receiver.
Initiates the programming sequence on the receiver.
Activates receiver response to a transmitter button press.
Confirms transmitter code with receiver.
Press and hold the learn code button for 10 seconds to erase all transmitter codes.
Reprogram the receiver with the remaining transmitter codes after erasing.
Procedure for replacing the transmitter's battery.
Procedure for attaching the visor clip to the transmitter.
To Next Page
