Genie TML-4000N User Manual

Operator’s Manual
with Maintenance Information
Genie North America
Phone 425.881.1800
Toll Free USA and Canada
800.536.1800
Fax 425.883.3475
Genie Australia Pty Ltd.
Phone +61 7 3375 1660
Fax +61 7 3375 1002
Genie China
Phone +86 21 53852570
Fax +86 21 53852569
Genie Malaysia
Phone +65 98 480 775
Fax +65 67 533 544
Genie Japan
Phone +81 3 3453 6082
Fax +81 3 3453 6083
Genie Korea
Phone +82 25 587 267
Fax +82 25 583 910
Genie Brasil
Phone +55 11 41 665 755
Fax +55 11 41 665 754
Genie Holland
Phone +31 10 220 7911
Fax +31 10 220 6642
Genie Scandinavia
Phone +46 31 3409612
Fax +46 31 3409613
Genie France
Phone +33 (0)2 37 26 09 99
Fax +33 (0)2 37 26 09 98
Genie Iberica
Phone +34 93 579 5042
Fax +34 93 579 5059
Genie Germany
Phone +49 (0)4202 88520
Fax +49 (0)4202 8852-20
Genie U.K.
Phone +44 (0)1476 584333
Fax +44 (0)1476 584334
Genie Mexico City
Phone +52 55 5666 5242
Fax +52 55 5666 3241
Hitch is sufficient to tow trailer and load
Hitch is properly attached to tow vehicle
Safety chains (if required) are properly attached
All tires have correct pressure
All lights are connected and working
Do not exceed 60 mph / 97 km/h
Check connections and tire pressure at each stop
Slow down for hazardous conditions
Allow extra distance for following and passing other vehicles
Second Edition
Seventh Printing
Part No. 43645
California Proposition 65
WARNINGWARNING
The exhaust from this product contains chemicals
known to the State of California to cause cancer,
birth defects or other reproductive harm.
Distributed By:
Towing Checklist
Third Edition
Second Printing
Part No. 97600
Hitching
Towing
·
·
·
·
·
·
·
·
·

Genie TML-4000N Specifications

General

Model	TML-4000N
Fuel Type	Gasoline
Max Output	4000W
Rated Watts	3500W
Starting Watts	4000W
Engine Type	4-Stroke OHV
Starting System	Recoil

Summary

Safety Rules and Warnings

General Safety Precautions

Key safety warnings and operational prerequisites before using the machine.

Operational Safety Hazards

Fall, Tip-over, and Electrocution Hazards

Identifies specific hazards related to falls, machine stability, and electrical dangers.

Machine Operation Hazards

Hazardous Operations and Towing

Explosion, Component Damage, and Towing Hazards

Pre-Operation Inspection

Pre-Operation Inspection Checklist

Machine Component Checks

Detailed list of components and areas to inspect for damage, wear, or missing parts.

Maintenance Procedures

Engine Oil Level and Symbols

Maintenance Checks (Continued)

Engine Coolant and Battery Checks

Tire and Wheel Maintenance

Tire Inspection and Scheduled Maintenance

Function Testing

Machine Function Testing

Test Setup and Mast Operation

Steps for setting up the machine and testing mast raise, lower, extend, retract, and rotation functions.

Function Testing (Continued)

Mast Stowage and Light System Test

Completing mast stowage tests and verifying the functionality of the light system.

Workplace Inspection

Workplace Hazard Identification

Operating Instructions

Setup, Engine Start, and Lights

Instructions for machine setup, starting the engine, and operating the lighting system.

Machine Operation Procedures

Mast Operation and Lamp Storage

Detailed steps for operating the mast, storing lamp fixtures, and grounding rod attachment.

Towing and Driving Safety

Towing Procedures and Information

Transport and Lifting Instructions

Securing Chassis for Transit

Lifting the Machine

Crane Lifting Procedures