Need help?Do you have a question about the Genie Z-33/18 and is the answer not in the manual?
General| Brand | Genie |
|---|---|
| Model | Z-33/18 |
| Category | Scissor Lifts |
| Language | English |
Provides information about the operation and daily maintenance manual for the user.
Details how to identify the machine using its serial number label and chassis stamping.
Specifies that the machine is for lifting personnel, tools, and materials to aerial work sites.
Explains Genie's bulletins and the importance of registering the machine for updates.
Instructions on how to maintain and clean safety signs on the machine.
Explains the symbols, color coding, and signal words used for hazard identification.
Illustrates the location and types of safety signs found on the machine.
Details requirements for personal fall protection equipment (PFPE) when operating the machine.
Warns about hazards from electrical current and provides clearance guidelines.
Highlights risks of tipping due to exceeding capacity or operating on uneven surfaces.
Specifies safe operation limits for slopes when the machine is in a stowed position.
Outlines safety measures to prevent falls from the platform.
Advises awareness of blind spots and boom movement to avoid collisions.
Instructs not to use a damaged or malfunctioning machine and proper tagging procedures.
Warns against using the machine as a ground for welding and exposing the motor pump to water.
Provides steps for safely parking and securing the machine after operation.
Warns about hazards from hydraulic/air leaks and accessing components without training.
Details precautions for charging batteries and operating in hazardous environments.
Explains the operator's responsibility for visual inspection before operation.
Describes the purpose of function tests to identify malfunctions before use.
Lists items to check during the pre-operation inspection for machine safety and condition.
Guides the operator through step-by-step instructions to test all machine functions.
Details testing procedures for ground controls, including emergency stop and machine functions.
Outlines testing procedures for platform controls, including emergency stop, horn, and foot switch.
Instructs on testing the machine's drive and braking capabilities under various conditions.
Explains how to test the drive enable system and its effect on machine movement.
Guides the operator to test drive speeds with the boom in different positions.
Provides a checklist of potential workplace hazards to be aware of and avoid.
Instructs on verifying that all decals are legible and in their correct locations.
Identifies and explains the functions of the controls located on the ground panel.
Identifies and explains the functions of the controls located on the platform panel.
Provides general guidelines and responsibilities for operating the machine safely.
Explains how to use the Emergency Stop buttons to halt all machine functions.
Details how to operate the machine using auxiliary power if the primary source fails.
Outlines the steps to operate the machine from the ground controls.
Details the procedure for operating the machine from the platform controls.
Explains how to control the machine's movement using the drive controls.
Describes how to steer the machine using the platform controls.
Provides guidelines and slope ratings for safe driving on inclines.
Explains how to measure and calculate the grade of a slope.
Describes the drive enable system and how it affects machine movement.
Explains the function of the machine not level indicator light and corrective actions.
Details the platform overload indicator light and how to resolve overload conditions.
Provides essential steps for securing and preparing the machine after operation.
Covers essential safety and operational instructions for batteries and chargers.
Step-by-step guide on how to properly charge the machine's batteries.
Explains how to check and maintain the hydraulic oil level for optimal machine performance.
Details the procedure for checking and maintaining the machine's batteries.
Specific instructions for the maintenance of standard batteries, including fluid levels.
Outlines the requirements for scheduled maintenance performed by qualified technicians.
Details how to configure the machine for winching, including brake release.
Provides instructions on how to properly secure the machine for transportation.
Explains how to secure the platform of the Z-33/18 model during transit.
Gives guidance on securing the machine's chassis using chains or straps.
Provides instructions on safely lifting the machine, including center of gravity and rigging points.
Illustrates the machine's operational reach and height capabilities in graphical format.
To Next Page
