Need help?Do you have a question about the Genie Z-51/30J and is the answer not in the manual?
General| Brand | Genie |
|---|---|
| Model | Z-51/30J |
| Category | Utility Vehicle |
| Language | English |
Safety rules regarding contact with or proximity to electrical current.
Safety rules regarding platform capacity and machine stability on slopes.
Safety rules for preventing falls from the platform or machine.
Safety rules to avoid collisions with other objects or the environment.
Safety rules for preventing explosions and fires, especially related to fuel and ether.
Safety rules for operating a machine that may be damaged or malfunctioning.
Safety rules to prevent bodily injury from leaks, exhaust, or improper access.
Safety precautions for handling batteries, including acid and explosive gas hazards.
Explanation of Genie product decals, symbols, color coding, and signal words.
Identification and description of controls located on the ground control panel.
Identification and description of controls located on the platform control panel.
Explains the purpose and responsibility of the pre-operation inspection.
Procedure for checking and adding engine oil to maintain proper levels.
Explanation of symbols used in the maintenance section of the manual.
Procedure for checking and adding hydraulic oil to maintain proper levels.
Procedure for checking battery condition, fluid levels, and connections.
Explains the purpose of function tests and procedures for malfunctioning machines.
Tests to be performed using the ground controls.
Procedure to test the functionality of the emergency stop button.
Tests to verify all boom and platform functions operate correctly.
Tests to be performed using the platform controls.
Procedure to test the horn functionality.
Procedure to test the steering functions using control handles and thumb rockers.
Tests to verify drive and braking functions operate correctly.
Tests to verify the drive enable system prevents drive when the boom is in certain positions.
Tests to verify drive speed limits when the boom is raised or extended.
Tests to verify proper contact of tires with the ground on uneven surfaces.
Tests the function that selects between lift and drive modes.
Identifies hazardous situations to be aware of and avoid during workplace inspection.
Explains the purpose of the operating instructions and operator responsibilities.
Procedure for starting the machine's engine, including pre-start checks and cold weather conditions.
Procedure for using the emergency stop buttons to halt all functions.
Instructions for using auxiliary power if the primary engine power source fails.
Steps for operating the machine from the platform controls.
Procedure for steering the machine using platform controls.
Procedure for driving the machine using platform controls, including speed adjustments.
Guidance on operating the machine on slopes, including slope ratings and determination.
Explanation of the drive enable system, its indicator light, and operation.
Explanation of the drive speed select symbols for incline and level surfaces.
Explanation of the platform overload indicator light and its function.
Guidance on interpreting the engine light and necessary actions.
Requirements for personal fall protection equipment when operating the machine.
Steps to follow after completing machine operation for safe parking and shutdown.
Procedure for inspecting decals for legibility and presence.
Instructions for configuring the machine for winching, including releasing brakes.
Steps for securing the machine to a truck or trailer for safe transportation.
Instructions for securing the machine's chassis using chains.
Instructions for securing the platform of the Z-51/30J model.
Procedure for safely lifting the machine using designated lifting points.
Detailed technical specifications for the Genie Z-51/30J model.
Graphical representation of the machine's operational reach and movement capabilities.
To Next Page
