Genius FaceCam 1020 - Device Setup and Configuration; Image Capture Setup

English
- 2 -
FaceCam 1020 supports UVC (USB Video Class) which can plug and
play in Windows 7/Vista/XP SP2 or Mac 10.4.9 and above without using
a device driver.
1. Make sure your PC OS system is Windows 7/Vista/XP SP2 or Mac 10.4.9
and above.
2. Plug in the FaceCam 1020 to a USB port.
3. FaceCam 1020 is now ready for use with any application. It can work
properly with any video chat software that supports a video feature. If you
use Mac OS, you can use iChat for online chatting.
Image Capture under Windows XP SP2 and Vista:
1. Double-click on the My Computer icon. Or click Start  My Computer
2. Now look for and double-click on “USB Video Device”, then you can start
to capture still images.
NOTE
 To check if Windows XP system is SP2 (Service Pack 2).
− Click on the My Computer icon on your desktop or in the Windows
Start menu.
− When the menu appears, click Properties.
 If your Windows XP system isn’t SP2 (Service Pack 2), go to the website
http://www.microsoft.com
to upgrade your version.
Set up the Device