Need help?Do you have a question about the Genius FALCON 5C and is the answer not in the manual?
General| Motor voltage | 24 VDC |
|---|---|
| Operating temperature | -20°C to +60°C |
| Maximum Current | 1.5 A |
| Remote Control Range | 30 m |
| Protection Level | IP44 |
| Power Supply | 230V AC |
| Gate Width | 5m |
| Motor Type | DC Motor |
General safety rules for installers to ensure safe product use and prevent accidents.
Details the components and technical characteristics of the FALCON automated system.
Helps determine the maximum operating time based on usage frequency, considering environmental factors.
Instructions for electrical connections and wiring for a standard system setup.
Essential checks before installation to ensure gate structure and site suitability for automation.
Instructions for preparing and installing the foundation plate for proper system mounting.
Steps for the mechanical assembly and mounting of the gearmotor onto the foundation plate.
Instructions on how to correctly install and adjust the mechanical limit switches for gate travel.
Procedures for testing the automated system and its accessories after installation.
Steps for manually releasing and operating the gate in case of power failure or malfunction.
Procedure to re-engage the system and restore normal automated operation after manual release.
Notes any specific applications not covered by standard procedures.
Recommendations for routine maintenance to ensure long-term performance and safety.
Guidance on where to seek professional assistance for product repairs.
Information on how to find and select compatible accessories for the system.
To Next Page
