English
-7-
Item Description
You may adjust values to improve the image appearance. Before
adjusting values, you have to unclick “Auto” to unlock.
- Press “Reset” to return to the manufacturer’s settings.
- Press “Restore” to return to the previous settings.
- Press “Save” to save the values you set up.
Select the correct frequency according to the country where you
are using the web camera. (Before doing this, you will need to
select “Indoor”.)
- If your web camera is located in a backlight position, you may
click “Backlight compensation” to get a sharper image.
- You can have a black-and-white photo effect by clicking on
“B/W Mode”.
To Next Page
Loading...
Need help?
General