Pos. 2
Pos. 2
Pos. 1
22
Instruction Manual
GB
batons/dices
+
+
quarters/
eighths
+
+
+
Insert the desired blade insert. The insert must audibly lock into
place. Please ensure that you do not touch the blades during use.
Always t the blade insert so that the required cutting surface is in
Position 1.
EXCEPTION: Cutting into eighths (see next section).
Cutting into eighths
Click the x-shaped fastener on the back of the cutting stamp for
eighths rmly into the struts on the inside of the cutter top.
Place the blade insert for quarters/ eighths in the cutter base so that
the cutting surface for eighths is in Position 2.
CAUTION!
The cutting stamp must only be used with the blade insert for
quarters/eighths. If another blade insert is being used, the cutting
stamp may NOT be used, or must be removed before use.
To Next Page
Loading...
