RAINBOW 524 C - RAINBOW 724 C
ENGLISH
Guide for the installer
Page 6
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol draws your attention to the notes on the characteristics and operation of the product.
CE DECLARATION OF CONFORMITY
Manufacturer: GENIUS S.p.A.
Address: Via Padre Elzi, 32 - 24050 - Grassobbio- Bergamo - ITALY
Declares that: Operator mod. RAINBOW 524 C - RAINBOW 724 CRAINBOW 524 C - RAINBOW 724 C
is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive
2006/42/EC;
conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage directive.
2004/108/EC Electromagnetic Compatibility directive.
and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will
become a component has been identified and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent
modifications.
Grassobbio, 01 February 2010
Managing Director
D. Gianantoni
•
•
•
•
•
INDEX
IMPORTANT WARNINGS FOR THE INSTALLER page.7
1. DESCRIPTION page.7
1.1 TECHNICAL SPECIFICATIONS page.7
2. ELECTRICAL PREPARATIONS (standard system) page.8
3. INSTALLING THE AUTOMATED SYSTEM page.8
3.1. PRELIMINARY CHECKS page.8
3.2. MASONRY FOR FOUNDATION PLATE page.8
3.3. MECHANICAL INSTALLATION page.8
3.4. ASSEMBLING THE ROD page.8
3.5. INSTALLING AND ADJUSTING THE BALANCING SPRING page.8
3.6. ADJUSTING THE MECHANICAL STOPS page.8
3.7. ADJUSTING THE TRAVEL LIMIT DEVICES page.8
4. INSTALLING THE ACCESSORIES (Optional) page.9
5. ELECTRIC CONNECTIONS page.9
6. START-UP page.9
7. MANUAL OPERATION page.9
8. RESTORING NORMAL OPERATION page.9
9. MAINTENANCE page.9
10. REPAIRS page.9
11. ACCESSORIES page.9
11.1. ARTICULATION KIT page.9
11.2. SKIRT KIT page.9
11.3. END FOOT page.9
11.4. FORK SUPPORT page.9
11.5. PHOTOCELL SUPPORT page.9
11.6. LUMINOUS STRIP FOR UPRIGHT page.9
11.7. LUMINOUS STRIP FOR ROD page.10
11.8. BATTERY KIT page.10