SPIN 3 - SPIN 4 - SPIN 424 - SPIN 6
ENGLISH
Guide for the installer
Page 5
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol draws your attention to the notes on the characteristics and operation of the product.
INDEX
IMPORTANT NOTES FOR THE INSTALLER page.6
1. DESCRIPTION (Fig.1) page.6
1.1. TECHNICAL SPECIFICATIONS page.6
3. INSTALLING THE AUTOMATED SYSTEM page.6
3.1. PRELIMINARY CHECKS page.6
3.2. WALLING THE FOUNDATION PLATE page.6
3.3. MECHANICAL INSTALLATION page.6
4. START-UP page.7
5. MANUAL OPERATION page.7
6. RESTORING NORMAL OPERATION page.7
7. MAINTENANCE page.8
8. REPAIRS page.8
9. AVAILABLE ACCESSORIES page.8
9.1. SKIRT KIT page.8
9.2. ARTICULATION KIT page.8
9.3. END FOOT page.8
9.4. FORK SUPPORT page.8
9.5. BAR LIGHT KIT page.8
9.6. BATTERY KIT page.8
CE DECLARATION OF CONFORMITY
(DIRECTIVE 2006/42/EC)
Manufacturer: FAAC S.p.A.
Address: Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALIA
Declares that: Operator mod. SPIN 3 - SPIN 4 - SPIN 424 - SPIN 6
• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive 2006/42/EC;
• conforms to the essential safety requirements of the following EEC directives:
• 2006/95/EC Low Voltage directive.
• 2004/108/EC Electromagnetic Compatibility directive.
• and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will become a
component has been identied and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent modications.
Bologna, July 18
th
2014 CEO
A. Marcellan
To Next Page
Loading...
Need help?
General
