Service Guide Model No : SW-HF5.1 5050V2
Attention
Please follow the numbered sequence marked within parenthesis given in individual Flow
chat, in that this is the best-recommended sequence to rectify the problems.
1.1 One or more channels no sound (Stereo in/DVD in jack no function)
Problem
Analyze
and
Identify
Cause
Solution
Speaker no sound
Component cold
solder or Short
Defective
IC1,U1,U2,U3,U4
Speaker cable disconnect,
Jack1 defective or
Check solder
point on PCBA
Check and
Reconnect speaker cable or
replace defective speaker
Page 7/24