June 2021 Genlab Ltd OP INS CLASSIC RANGE MINI/MINO REV1
Page 4 of 4
7 GENERAL
Mop up any spilled liquid from the floor of the unit.
Do not place samples on the chamber floor.
Take the normal precautions not to allow water to come into contact with the electrical
components.
The outer surfaces can be cleaned with a warm, damp, soapy cloth or any proprietary
cleaner suitable for a painted surface (do not use solvents or harsh abrasives).
The work chamber may also be cleaned as above.
PLEASE NOTE
Quote the model and serial number (shown on the voltage plate on the back of the unit) for
replacement parts. Fitting instructions are supplied with any replacement parts ordered.
To Previous Page
Loading...