Gent 13270-02 - User Manual

Operating manual and Log book for the range of
1,2,4 and 8 zone fire Control and Repeat panels
The panels are designed in
accordance with the requirements
of EN54 Part 2:1997 (and include
optional clauses 7.8, 7.11 & 10),
plus the requirements of EN54
Part 4:1997.
This publication covers the:
q Conventional fire alarm panels:
1 zone panels:- XENEX1,
75585-01NMB, 13270-01 and
13270-01LB
2 zone panels:- XENEX2,
75585-02NMB, 13270-02 and
13270-02LB
4 zone panels:- XENEX4,
75585-04NMB, 13270-04 and
13270-04LB
8 zone panels:- XENEX8,
75585-08NMB, 13270-08 and
13270-08LB
q
Fire alarm repeat panels:
XENEX RPT, 75586-08NMB
and 13271-08 and 13271-08LB.
Panel code ending with LB
signify Less batteries.
This manual and logbook is
intended for use by the end user
and should be located in a secure
but accessible position close to
the panel. It is the responsibility of
the end user to maintain the
logbook.
An Installation and
Commissioning guide has
been supplied to your
installer with this panel.
Year 2000 Compliance
The panels are designed in
accordance with the requirements
of LPS2000.
Contents
Page
Description of main 2
controls and indicators
User responsibility 3
Operating instructions 5
Log book 7
Part 2 of 4188-424 Issue 2 1 03/01
http://www.firealarmengineers.com

Summary

Description of Main Controls and Indicators

Controls Overview

Details panel controls requiring access code entry, including keypad, shift, display test, cancel buzzer, and system reset.

Indicator Lights Explained

Explains the meaning of various panel indicator lights: Fire, Fault, Power, Test, Day/Night, and Access/Function status.

User Responsibility and Maintenance

Daily Checks and Procedures

Outlines daily system inspection, ensuring normal indications and checking for fault conditions per BS 5839.

Weekly Testing Procedures

Manual Call Point Operations

Testing a Manual Call Point

Procedure for testing the manual call point using the test key to engage the cam mechanism.

Replacing a Broken Glass

Steps for safely replacing the glass on a manual call point after it has been broken.

Operating Instructions

Fire Condition Indications

Post-Emergency Procedures

Operating Instructions - Detailed Actions

Fault Condition and Rectification

Describes fault indications, how to cancel the fault buzzer, and suggested actions for fault rectification.

System Configuration Record

Detection and Zone Circuit Configuration

Sounders and System Reset Configuration

Access Level Settings

Gent 13270-02 Specifications

General

Brand	Gent
Model	13270-02
Category	Control Panel
Language	English