Gentex HomeLink - User Manual


Programming and Information Guide
Information on compatible products and video programming instructions are available at
www.homelink.com
Only press the transmitter button on the integrated garage door opener if there are no
persons or objects present within the sweep of the garage door. People could otherwise be
injured by the movement of the door.
1
2
3
4
Integrated garage door opener on the rear-view mi
of this integrated garage door opener.
rror Garage door remote control 5 is not part
atteries in garage door remote control 5 before
programming.
e programming, clear all HomeLink memory by following the instructions in the
"clearing memory" section (page 333)
the ignition lock.
ed garage door opener. Indicator lamp
1 lights up yellow.
ntrol 5 towards buttons 2 to 4 on the rear-view mirror at a distance of 2 to 8
inches (5 to 20 cm).
tton 6 on remote control 5 until indicator lamp 1 lights up green. If the
indicator lamp 1 does not turn green, reposition the remote control 5 and repeat this step.
To achieve the best result, insert new b
•► For first tim
•► Turn the SmartKey to position 2 in
•► Press and release one of buttons 2 to 4 on the integrat
•► Point remote co
•► Press and hold bu
HomeLinkandtheHomeLinkhouseareregisteredtrademarksofGentexCorporation.

Summary

Programming the HomeLink System

Initial Programming Steps

Guide for first-time programming, clearing memory, and initial button presses.

Synchronizing the Rolling Code

Steps to synchronize the transmitter with the garage door opener motor-head unit.

Notes on Remote Control Programming

Addresses Canadian radio frequency laws and alternative programming methods.

Troubleshooting and Operation

Problems During Programming

Instructions for resolving issues encountered during the programming process.

Opening and Closing the Garage Door

How to operate the garage door system after successful programming.

Clearing the Memory

Procedure to clear all previously programmed HomeLink devices.

Regulatory Information

FCC and IC Compliance

Details on compliance with FCC and Industry Canada radio frequency regulations.

Gentex HomeLink Specifications

General

Connectivity Protocol	RF (Radio Frequency)
Security	Rolling code technology
Power Source	Vehicle's electrical system
Dimensions	Varies by model
Range	Up to 100 feet
Buttons	3
Installation	Integrated into vehicle