EasyManua.ls Logo

Gentherm CSZ Blanketrol II 222S User Manual

Gentherm CSZ Blanketrol II 222S
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation and Technical Manual
Model 222S Hyper-Hypothermia Units
Cincinnati Sub-Zero Products, LLC 12011 Mosteller Road Cincinnati, Ohio 45241, U.S.A.
www.cszmedical.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Gentherm CSZ Blanketrol II 222S and is the answer not in the manual?

Gentherm CSZ Blanketrol II 222S Specifications

General IconGeneral
BrandGentherm
ModelCSZ Blanketrol II 222S
CategoryMedical Equipment
LanguageEnglish

Summary

BLANKETROL II Operation and Technical Manual

Symbols and Definitions

Explains the meaning of various symbols used in the manual.

Important Safety Warnings

Critical warnings and precautions for safe operation and patient care.

Cautionary Notes

Lists important cautions to follow during unit operation and maintenance.

Section 1: Introduction and System Overview

General Safety Precautions

Outlines essential safety measures for operating the system.

Physical Description of the BLANKETROL II Unit

Details the external features and components of the unit.

Functional Description and Theory of Operation

Explains the system's operational principles, including control modes.

Temperature Safety Control System

Describes the safety mechanisms for high and low temperature control.

Section 2: System Preparation and Setup

Unpacking and Initial Inspection

Procedures for unpacking and inspecting the unit for shipping damage.

First Time Set-Up and System Test Routine

Step-by-step guide for initial setup and functional testing.

Unit and Patient Related Precautions

Precautions related to the unit and patient care during use.

Section 3: Operating the BLANKETROL II Unit

Arranging the System Components

Steps to collect and arrange all necessary equipment for operation.

Operating the BLANKETROL II Unit in Auto Control Mode

Instructions for operating the unit using automatic patient temperature control.

Operating the BLANKETROL II Unit in Manual Control Mode

Instructions for operating the unit using manual water temperature control.

Setpoint/Status Display Messages

Explains the various messages displayed on the unit's status screen.

Section 4: General Maintenance

Test Equipment Required for Maintenance

Lists the necessary test equipment for performing maintenance checks.

Water Reservoir Maintenance Procedures

Covers draining, cleaning, and replenishing the water reservoir.

Low and High Limit Safeties Check

Procedures for verifying the unit's low and high temperature safety limits.

Temperature Accuracy Check

Method for checking and verifying the accuracy of temperature readings.

Section 5: Field Repair and Service

Accessing Internal Components

Methods for accessing the unit's interior for service.

Replacement of the Microprocessor Board

Instructions for replacing the unit's main processing board.

Troubleshooting Guide

A guide to identify and resolve common issues and error messages.

Section 6: Parts Information

Ordering Replacement Parts

Information on how to order necessary replacement parts from the manufacturer.

Recommended Replacement Parts Inventory

A list of recommended spare parts for inventory.

Section 7: Specifications and Certifications

BLANKETROL II Model 222S Features

Detailed specifications of the unit's physical, safety, and electrical systems.

Electromagnetic Compatibility (EMC) Information

Guidance and declarations regarding electromagnetic emissions and immunity.