__________________________________________________________________________________
MENU CONTROL
· ”MENU” open OSD menu, and enter.
· ”UP” up and increase.
· ”DOWN/AUTO” down and reduce.
Press this key auto scan CGA/EGA signal.
Press this key over 5 second and release reset system.
(This operation is invalid when you open OSD menu)
· ”SW” switch input signal YUV/RGBS/RGBHV.
(This operation is invalid when you open OSD menu)
· ”Clamp sp”&”Clamp” please don’t adjust this button, excepting the monitor have black item, or picture
discoloration.
· More functions control please look to OSD to operation.
POWER SUPPLIES:
· Power cable – 2 Pin Connector
· Multi-Voltage Power Supply: 100-240VAC to 5V DC 2.0A Switch Mode Power Supply
(Center Positive)
FAQ
♦ No signal on you monitor
Please check input and output cable, make sure all cable it’s connected. And make sure power it’s on.
Display on you monitor it’s “No signal” please press “SW” to switch input signal.
♦ Input not supports
When you monitor display “input not supports” maybe you need change to low resolution. Please press
“DOWN/AUTO” over 5 second and release. System reset to 800*600 output.
♦ Image not full on your screen
Please enter menu adjust image position and zoom.
♦ Image shake or freeze
Please press “DOWN/AUTO”, system auto scan input signal and restore image.
♦ Have black item on screen, or all screen it’s too black, or picture discoloration.
Please adjust “Clamp sp” and “Clamp st”, please keep “Clamp st” less than “Clamp sp”.
Advice “Clamp st” SET “03″, “Clamp sp” SET “04″.
♦ Image color not right
Please adjust R\G\B VR.
__________________________________________________________________________________
HD-CONVERTER
USER MANUAL
MODEL GBS-8200
CGA/EGA/YUV TO VGA CONVERTER
VERSION 3.0
2008-11
NOTE
The high definition converter GBS-8200 it’s professional of game convert. Support all games
(Amusement、Play station、Xbox、wii……) convert to CRT monitor 、LCD monitor 、PDP monitor……
Auto scan CGA EGA YUV signal, VGA outputs, output high resolution signal.
FEATURES
· Supports CGA/EGA/YUV signal input.
· Supports VGA output 640*480,800*600,1024*768,1360*768
· CGA/EGA signal auto scan(15K,24K,31K)
· YUV(YPbPr) signal auto scan(480i,576i,720i,1080i,480p,576p,720p,1080p)
· Chinese and English OSD.
· Supports position control & zoom control.
· True digital 24-bit A/D converter for true 16.7-million color conversion.
· Supports all VGA monitor (CRT、LCD、PDP、PROJECT……)
PACKAGE CONTENTS
Included with the CGA/EGA/YUV to VGA HD-Converter PCB (GBS-8200) will be:
• The main GBS-8200 PCB
• 2-Pin +5VDC Power Cable
• 8Pin (6 wire) TGB Cable
• This GBS-8200 Guide/Manual (4 pages)
To Next Page
Need help?
General