GENUINE Buddy 125 User Manual

1
Dear Customers:
Thank you for purchasing the Buddy from Genuine Scooter Company. The
efficiency and longevity of each scooter will depend heavily on the operating
method of each user. This owner’s manual will provide you with operating
instructions, precautions, and general maintenance information required to
safely operate and maintain your scooter. Please read the entire manual before
operating your scooter.
The Buddy comes in three different engine configurations. The Buddy 50 has a
2-stroke 50cc engine, the Buddy 125 has a 4-stroke 125cc engine, and the Buddy
150 has a 4-stroke 150cc engine and Buddy 170 has a 4-stroke 170cc EMS engine.
Please be aware of your scooter’s engine configuration while reading this
manual.
If you have any questions, please ask your dealer for assistance.

GENUINE Buddy 125 Specifications

General

Displacement	125cc
Front Suspension	Telescopic fork
Rear Suspension	Single Shock
Front Brake	Disc
Rear Brake	Drum
Curb Weight	220 lbs
Cooling	Air-cooled
Compression Ratio	9.6:1
Ignition	CDI
Weight	220 lbs
Transmission	Automatic (CVT)
Starting System	Electric and kick
Bore x Stroke	52.4 mm x 57.8 mm

Summary

Scooter Safety

Safe Riding Rules

Rules to ensure safety before riding the scooter.

Limited Warranty for Genuine Scooters

To Obtain the Warranty Service

How to obtain warranty service and its effectiveness.

Procedure of the Warranty

Steps for warranty procedure and dealer responsibilities.

Things Not Covered in This Warranty

Items and damages not covered by the warranty.

Interruption of the Warranty Period

Conditions for interrupting the warranty period and responsibilities.

Parts Name for Movable Model

Parts Name for Fixed Model

Caution

Identification

Switches and Controls

Main Switch

Controls ignition and lighting system of the scooter.

Gauges & Indicators

Signal Indicator (Green)

Indicates when the blinker switch is shifted.

High Beam Indicator (Blue)

Indicates when the high beam switch is set to 'HI'.

Oil Warning Indicator

Warns to check or fill engine oil immediately.

Speedometer

Displays the speed of the scooter.

Fuel Gauge

Shows the approximate fuel supply available.

EMS Selfish Check Indicator

Indicates Engine Management System status.

Handlebar Controls

Hi/Lo Beam Switch

Controls high and low beam functions of the headlight.

Turn Signal Switch

Activates left or right turn signals and turns them off.

Horn Button

Activates the scooter's horn.

Starter Button

Operates the starter motor to start the engine.

Steering Lock

Seat Lock

Fuel Tank Cap

Kick Starter Lever

Luggage Compartment

Pre-Riding Inspection

Brake

Adjustment

Procedures for adjusting brake play.

Front Brake

Description of front brake operation and inspection.

Front/Rear Brake Levers

Inspecting free play of brake levers.

Brake Fluid (Disk Brake)

Checking and refilling brake fluid level.

Disk Brake Pad

Information on replacing disk brake pads.

Brake Fluid Leakage Inspection

Checking for brake fluid leaks.

Throttle Grip

Engine Oil

Air Cleaner

Tires

Tire Pressure

Standard tire pressure for front and rear.

Simple Check

Visual inspection of tires for wear or damage.

Tread Depth

Guideline for replacing tires based on tread depth.

Catalytic Converter

Notation for Operation & Riding

Starting Engine

Steps and cautions for starting the engine.

Warming Up the Engine

Accelerating

How to control speed using the throttle grip.

Engine Break-In

The Air Cleaner

The Spark Plug

Changing Gear Oil

Front Brake Check

Brake Fluid Check

Front Fork Check

Visual Check

Inspecting front forks for damage or leaks.

Function Check

Checking the front fork's compression and rebound.

Fuel Draining Device

EMS Quick Diagnostic

Fuse Replacement

Battery

Reporting Safety Defects