Why is there no supply air from my Genvex Fan?
If you're experiencing no supply air from your Genvex Fan, consider the following potential causes: * A faulty supply air fan. * A clogged supply air filter. * The fresh air grill may be clogged with dirt, leaves, snow, or ice. * A fuse on the circuit board may be blown. * The unit may be in defrost mode, which stops the supply air fan.
Why is my Genvex Fan supply air cold?
If the supply air from your Genvex Fan is cold, check these potential issues: * A clogged heat changer. * A faulty extract air fan. * A clogged extract air filter. * The electrical reheater may be disconnected at the overheating thermostat (only applicable for units with an electrical reheater installed). * There may be air in the heating pipes, a faulty thermostat/motor valve, or an incorrect setting on the control panel.
Why is there no extract air from my Genvex Fan?
If there's no extract air from your Genvex Fan, consider these possibilities: * A faulty extract air fan. * A clogged extract air filter. * A blown fuse on the circuit board.
To Next Page
General