GENZLER KINETIX 800 - User Manual

1
ALL TUBE PRE AMP
ULTRA LIGHTWEIGHT, 800 WATT BASS AMPLIFIER
OWNER’S MANUAL
PRODUCT DESCRIPTION
– The
KINETIX
™
800
represents the latest revolution in lightweight, high-output, and versatile
bass amplification from GENZLER® AMPLIFICATION. With our years of research, design, and manufacturing expertise,
we developed this model utilizing stringent design parameters for form, function, fit and finish. This latest design blends
the warmth and harmonic content of a CLASS A, all tube preamp design, offering three 12AX7 tubes running at a full 300
volt plate voltage and a high output, Class D, 800 watt power module, delivering a professional high-powered, tour-class
bass guitar amplifier weighing just over 7 lbs!
Our circuitry and mechanical designs within the
KINETIX
™
800
deliver an all-new platform in tube preamp, compact bass
amplification design – exactly what players have come to expect from the
GENZLER®
design team. From natural,
pristine, quick responsive reproduction of the bass instrument to classic, vintage harmonic textures with “weighted feel to
the notes”, the
KINETIX™ 800
provides the tonal pallet needed to cover all of the bassist’s amplifier requirements. All of
which is housed in an aircraft-grade, brushed aluminum chassis with a sleek custom extruded front panel.

Summary

Product Description

Front Panel

Input

Describes the 1/4" unbalanced instrument input jack and its impedance.

Mute;On;Boost Switch

Explains the 3-position toggle switch for Mute, On, and Boost functions, including LED indication.

Tone Controls

Gain and Volume Controls

Details the Gain control for preamp level and Volume control for preamp output.

Lean;Fat;Thick Switch

Describes the 3-position tonal foundation switch affecting HPF and low-end response.

Equalization Filters

Covers the Bass, Lo-Mid, Mid, Hi-Mid, and Treble EQ controls with their frequency and boost/cut ranges.

Master Status LEDs

STBY (Red) LED

Indicates standby or protect mode, illuminating during power-up and fault conditions.

OPER (Blue) LED

Indicates that the amplifier is ON and ready for operation.

Rear Panel Connections

Power Inlet and Switch

Details the IEC power cord connector and rear panel power switch.

Line Voltage Selector

Crucial switch for setting the correct voltage (115V or 230V) for the high voltage tube supply.

Speaker Outputs

Describes the two Neutrik Speak-On connectors and minimum load of 2.67 ohms.

Impedance Selector Switch

Explains the switch for matching total speaker impedance (8/4 ohm or 2.67 ohm selections).

Aux In, EFX Loop, Tuner, Direct Output

Details connectivity for Aux In, EFX Loop (Send/Receive), Tuner Out, and balanced Direct Output.

Headphones Output

Describes the 1/4" TRS jack for headphones, suitable for silent practice.

Specifications and Safety

Internal Tube Selection

Notes the use of 3 premium 12AX7 preamp tubes and how to access them.

Gig-Bag

Information about the optional padded carry bag.

Amplifier Specifications

Lists rated power, minimum impedance, dimensions, weight, product type, and operating conditions.

Safe Operating Requirements

Key safety guidelines including ventilation, liquid avoidance, grounding, and user serviceability.

Warnings and Warranty

Warning Statement

Advises users to be familiar with high-powered audio equipment and releases liability.

Compliance Statement

Details FCC compliance for Class A digital devices and potential radio frequency interference.

Warranty Information

Outlines the 3-year warranty, exclusions, service requirements, and registration.

GENZLER KINETIX 800 Specifications

General

Power Output	800 Watts
Effects Loop	Yes
Type	Solid State
Channels	2
Outputs	XLR, 1/4"
Frequency Response	20 Hz - 20 kHz
Input Types	1/4", XLR
Footswitch I/O	Yes
Impedance	4 Ohms, 8 Ohms
Speaker Outputs	2 x Speakon, 1/4"
EQ	3-band EQ per channel