EasyManua.ls Logo

geo-FENNEL FHT 100 - Page 7

geo-FENNEL FHT 100
16 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
EN
Technical Data
Display Large 4-1/2 dual digital LCD display with backlight
Sensor Type A single chip relative humidity and temperature multi sensor modu-
le comprising a calibrated digital output.
Response Time %RH:10S (90% at +25° still air)
Accuracy Note Accuracy is specified for the following ambient temperature range:
64 to 82°F (18 to 28°C)
Sampling Rate 2,5 samples per second
Operating Conditions 0 – 40°C, < 80 % RH, non-condensing
Storage Conditions -10 bis + 60°C, < 80 % RH, non-condensing
Batterieanzeige Anzeige im Display, wenn Batterie ausgetauscht werde muss
Auto Power off
Meter automatically shuts down after approx.15 minutes of inactivity
Power supply 1 x 9 V batterie (006P or NB1604)
Size 225 x 45 x 34 mm
Weight 200 g
Humidity 0 % - 100 % RH
• Humidity Accuracy +/- 2 % RH (at 25 °C, 20 – 80 %RH)
+/- 2,5 % RH (at other ranges)
Temperature -30 °C at + 100°C
• Air Temperature Accuracy +/- 0,5 °C (at 25 °C)
+/- 0,8 °C (at other ranges)
Resolution 0,01 % RH, 0,01°C
Low Battery Indication
is displayed when the battery voltage drops below the opera-
ting level.
Over-range
OL mark indication
• Digital Humidity and Temperature Meter
• Battery
• Case
• Users’ manual
SUPPLIED WITH
B

Related product manuals