Need help?Do you have a question about the geo-FENNEL FL-200A-N and is the answer not in the manual?
General| Accuracy | ±1.5mm/10m |
|---|---|
| Self-levelling range | ±5° |
| Wavelength | 635 nm |
| Dust / Water Protection | IP54 |
| Light Source | Laser Diode |
| Type | Laser Level |
| Range/Working Range | 200m |
| Laser Class | Class 2 |
| Operating Time | 20 h |
| Measurement Range | Up to 800m with detector |
| Detector | Optional |
| Operating Temperature | -10°C to +50°C |
| Power Supply | 4 x AA Alkaline |
Emphasizes locking the compensator during transport or vertical use to prevent damage.
Instructions for placing the instrument on a flat surface or tripod for horizontal alignment.
How to turn the device on and its automatic self-levelling function within +/- 3.5°.
Using buttons to change rotation speed, select scanning modes, or return to rotation.
Method to verify accuracy by marking a line, rotating 180°, and comparing readings.
Procedure to perform a secondary accuracy check after rotating the instrument by 90°.
Crucial safety advice including not looking into the beam, not aiming at people, and not opening the housing.
Specifies use cases and details hazards like eye injury from direct beam exposure.
States the instrument is Class 2 laser product and confirms laser warning labels are attached.
To Next Page