Comfort Controls
and
Audio
Systems
How
to
Shut
Off
the Theft-Deterrent
Feature
If
your radio is secured
(“SEC”
shows on
the display) and you wish to disable
it,
enter your security code
as
follows,
pausing no more than 15 seconds between
steps:
1.
Press the “1” and
“4”
buttons together.
Hold them down until “SEC” shows
on the display.
You
are now ready to
enter your security code.
until the first digit
of
your code
appears.
3.
Press the “SEEK
b”
button and hold it
until the second digit
of
your code
appears.
4.
Press the
“TUNE
4”
button and hold
it until the third digit
of
your code
appears.
2.
Press the “SEEKA” button and hold it
5.
Press the
“TUNE
b”
button and hold
it until the fourth digit of your code
appears.
checked that the code you entered
matches the one you wrote down.
display.
6.
Press
“AM-F’”’
after you have
64
----
”
should now appear in the
If
the code is correct, the radio will now
operate.
If
the code
is
wrong, “Err” will
appear in the display.
To
Unlock
the
System After
a
Power
Loss
If
power is disrupted to the radio while in
the “SEC” mode, the unit will not work
and
“LOC”
will show on the display
whenever the ignition is on.
To
unlock the
unit:
1.
Press
‘‘4
SEEK
F’’
and/or
‘‘4
TUNE
by’
and
“000.0”
will appear
on the display.
2.
Press the “SEEKd” button and hold it
until the first digit
of
your code
appears.
3.
Press the “SEEK
b”
button and hold it
until the second digit of your code
appears.
4.
Press the
“TUNE
4”
button and hold
it until the third digit
of
your code
appears.
5.
Press the “TUNE
b”
button and hold
,
it until the fourth digit of your code
appears.
checked that the code matches the one
you wrote down. Now
“SEC”
will
appear on the display.
6.
Press
“AM-FM”
after you have
...
92
To Next Page
Loading...
