G116 User Guide Document: G116-1
-----------------------------------------------------------------------------------------------------------------------------------------------
-
1
Table of Contents
Disclaimer/Copyright Statement.......................................................................................................... 2
Warranty/RMA………………………………………………………………………………………………… 2
FCC/CE Statement............................................................................................................................... 2
Introduction……………………………………………………………....................................................... 3
Specification…………………………………………………………………………………………………… 4
Functions and Features....................................................................................................................... 5
1. Content in the packing box............................................................................................................ 7
2. Basic operation & settings………………………………………………………………………………. 7
2.1. Connecting the Input and output…………………………………….…..................................... 7
2.2. LED indicators………….....................................................…………....................................... 8
2.3. System Connection and Power On.......…………………………………………………………… 9
2.4. System Settings: Box ID, RS232, Ethernet............................................................................. 9
2.5. How to use IR Remote Controller........................................................................................... 11
2.6. Full screen and native aspect ratio………………………………………………………………… 12
2.7. Image rotation and flip………………………………………………………………………………. 12
2.8. Color adjustment…………………………………………………………………………………… 13
2.9. OSD Lock and unlock……………………………………………………………………………… 14
2.10. System synchronization…………………………………………………………………………… 14
2.11. Dual window display—PIP/POP (Picture in picture & side by side) …………………………. 15
2.12. Image Orientation (Flip & Rotation) ……………………………………………………………… 17
3. Geometry Alignment………………………………………………………………………………………. 18
3.1. Select the right Grid Pattern for geometry alignment……………………………………………. 18
3.2. Grid pattern pixel size selection……………………………………………………………………. 18
3.3. Geometry alignment………………………………………………………………………………… 19
3.3.1. Geometry alignment through remote controller……………………………………………. 20
3.3.2. [2x2] 4 corner geometry alignment…………………………………………………………… 20
3.3.3. [3x3], [5x3], [9x5] warp alignment……………………………………………………………. 21
3.3.4. Linearity grid line adjustment…………………………………………………………………. 21
3.3.5. Corner [Wall] geometry adjustment…………………………………………………………… 22
3.3.6. [Gwarp3] PC Tool ...……………………………………………………………………………. 24
4. [Video Wall] settings………………………………………………………………………………………. 25
4.1. [Zoom]: split the signal source……………………………………………………………………… 26
4.2. [Pan]: assign image location………………………………………………………………………… 26
4.3. [Overlap]: crop the right image for each projector………………………………………………… 27
4.4. [Position]: shift image position without changing image size……………………………………. 27
4.5. [Edge Mask] …………………………………………………………………………………………… 27
5. Save/Load system settings………………………………………………………………………………. 29
6. WebGui and Gwarp3 PC tool……………………………………………………………………………... 30
6.1. WebGui ……………………………………………………………………………………………… 30
6.2. Gwarp3 PC Tool ……………………………………………………………………………………. 31
7. Complete system aspect ratio adjustment……………………………………………………………..…. 31
8. Miscellaneous settings……………………………………………………………………………………. 33
8.1. Helpful tips…………………….……………………………………………………………………. 33
To Next Page
Loading...