Geokon 8800-2-1A User Manual

Instruction Manual
Model 8800 series
GeoNet Wireless
No part of this instruction manual may be reproduced, by any means, without the written consent of Geokon, Inc.
The information contained herein is believed to be accurate and reliable. However, Geokon, Inc. assumes no responsibility
for errors, omissions or misinterpretation. The information herein is subject to change without notification.
Copyright © 2014-2018 by Geokon, Inc.
(Doc Rev N, 11/14/2018)

Geokon 8800-2-1A Specifications

General

Brand	Geokon
Model	8800-2-1A
Category	Other
Language	English

Summary

Introduction to GeoNet Wireless System

Sensor Node Functionality and Accessories

Describes the function and accessories of a Sensor Node, including antenna and batteries.

Network Supervisor Role and Components

Explains the Supervisor's role in data aggregation and lists its included accessories.

Network Installation Guide

Required Items for Network Setup

Configuring Communication Channels

Connecting Sensors to GeoNet Nodes

Guides on attaching sensors via cable gland or bulkhead connectors.

Battery Installation for GeoNet Devices

Step-by-step guide for installing D-cell batteries into the unit.

Understanding Deployment Mode

Status Button Functionality Overview

Details the meaning of LED indicators and the function of the status button.

GeoNet Multiplexer System

Multiplexer Installation and Protection

Connecting Multiplexer to Node

Connecting Sensors to Multiplexer

Guides on connecting sensors to the multiplexer via different connector types.

Addressable Sensor Nodes

Wiring Addressable Sensors

Details wiring for addressable sensors with bulkhead connectors or bare leads.

Troubleshooting Addressable Nodes

Maintenance Procedures

Estimating Battery Lifespan

Replacing Device Batteries

Guides on when and how to replace batteries for optimal operation.

General Troubleshooting

Appendix C: Connector Pinouts

Transducer Cable Connection Pinouts

Details pinouts for transducer cables for different connector types.

Communication Connection Pinouts

Provides pinout details for RS-232 and USB communication connections.

Appendix D: Modbus Protocol

Data Conversion Formulas

Provides equations for converting raw sensor data to real-world values.

Appendix F: Firmware Upgrade

Firmware Upgrade Procedure

Step-by-step instructions for performing a firmware upgrade on the units.

Troubleshooting Firmware Upgrades

Offers troubleshooting tips for firmware upgrade issues.