ZAL300 | 4Care and Transport
EN
Field adjustment After long periods of storage inspect the field adjustment parameters given in
this user manual before using the product.
Cleaning and Drying
Product and
Accessories
• Blow dust off lenses and prisms.
• Never touch the glass with your fingers.
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the
cloth with water or pure alcohol. Do not use other liquids; these may attack
the polymer components.
Damp products Dry the product, the transport container, the foam inserts and the accessories
at a temperature not greater than +40°C / +104°F and clean them. Do not
repack until everything is dry. Always close the transport container when using
in the field.
To Next Page
Loading...