GEONAUTE ONchannel 500

Need help?

Do you have a question about the GEONAUTE ONchannel 500 and is the answer not in the manual?

Summary

1 PRECAUTIONS FOR USE

2 DESCRIPTION

3 GETTING STARTED

3.1 Using the batteries

Instructions on battery insertion, charging, and recycling, including important safety precautions.

4 TRANSMITTING AND RECEIVING

4.2 Switching on the device

Step-by-step instructions on how to power on the device and enter standby mode.

4.3 Configuring the channel

Detailed steps for setting the communication channel and CTCSS codes for optimal transmission and reception.

4.3.1 Setting the channel

Guide on how to select the desired channel number (1-8) and CTCSS sub-channel (0-38).

4.3.3 Scan function: channel scanning

4.3.4 DCM function: Simultaneous monitoring of 2 channels

4.4 Adjusting the sounds

4.4.1 Listening and ringer volume

4.5 Call function

4.6 Vox function

How to activate the Voice Activated Transmission (VOX) feature and adjust its sensitivity levels.

4.7 Switching the device off

Procedure for safely powering down the walkie-talkie to conserve battery life.

7 ACCESSORIES

7.1 Using the earpiece kit

8 TECHNICAL CHARACTERISTICS

8.1 Specifications

10 WARRANTY