15
English
WARNING: Always use SD Cards certified by Navionics. The use of non-certified
cartridges may result in improper operation of the unit. Insert and extract the cartridges
when the unit is completely switched off and disconnected from the battery charger
or external power supply. Make sure that the golden contacts turn to the unit’s front
side.
The SD Card can be used as a mass-storage with any PC
computer, so can be the cartridge used by the plotter. However,
the plotter needs to find some free space in the cartridge in
order to work properly. Prior to use a new cartridge, always
make sure that there are at least 2.5MB of free space.
WARNING: Be careful when handling the cartridge files by using the PC. Microsoft
Windows allows deleting and moving files easily, therefore avoid erasing the files
from the directories present in the cartridge. Damaging the files stored in such direc-
tories may result in loss of data or improper operation of the unit.
To Next Page
Loading...
