31
English
Autozoom
With the Autozoom function the
GEONAV will always display au-
tomatically the boat’s position
and the target waypoint at the
best available chart range. As the
boat approaches the target
waypoint, the unit will automati-
cally zoom in. Once the waypoint
is passed, the unit will select the best range to display the
boat’s position and the following waypoint.
To activate the Autozoom function, press ZOOM+ until the
“AUTOZOOM ? ENTER = YES” message is displayed, then
press ENTER to confirm the operation.
To deactivate the Autozoom function, press the ZOOM key once.
When the GEONAV is turned on, and if at least one waypoint
has been previously entered, the Autozoom function is auto-
matically activated.
To Next Page
Loading...
