Geonav 3 - Page 70

70
English
Setup
NOTE: The Chart Rotation function is automatically suspended as the Photo Overlay
function is enabled.
• Set Chart Detail (STD/USER/ALL)
Selects the chart details to display. It is possible to select
one of the two settings available (STD - equivalent to the
standard display setting, as defined by ECS regulations -
and ALL, that enables the display of all the items on the
chart). By choosing USER, enables/disables the display of
the single items. The information essential to the safety of
navigation cannot be disabled.
• Easy View (ON/OFF)
Enables/disable the Chart Magnification function.
• Overzoom (ON/OFF)
Enables/disable the Overzoom function.
• Presentation (INTER./U.S.)
Selects the symbols and colors of chart presentation.
• Own Ship Icon
Selects the icon that will identify the ship’s position on
the screen.
3D DISPLAY
• Names (ON/OFF)
Enables/disables the
visualisation of names in the
3D display.
• Navaids (ON/OFF)
Enables/disables the
visualisation of navaids in
the 3D display.
• Photo (ON/OFF)
Selects the type of texture for the 3D display, to choose
from satellite photograph and simple texture.
NAVIGATION
• Calibration (ON/OFF)
Calibrates the ship’s position received by the GPS device.