GeoSafari Tuff - Product Operation; Taking a Photo; Taking a Video

GeoSafari
®
Tuff Cam User Guide
6
Taking a Photo
• Slide the Mode switch to PHOTO
• Turn ON the camera, by pressing the On/Off
switch briey
• Point the camera at the subject
• Press the trigger button to take the photo
• Pressing the OK/Play button will cycle through
the ash modes: Auto, Forced ON, Forced OFF
• Press the << or >> to zoom in or out of the photo
Taking a Video
• Slide the Mode switch to VIDEO
• Turn ON the camera, by pressing the On/Off
switch briey
• Point the camera at the subject
• Press the trigger button briey to start the video
• Press << or >> to zoom in or out
• Press the trigger button again to nish the video
• You can also press and hold the trigger button and
Tuff Cam will take a video for the whole time that the
button is pressed (memory permitting)