Quickstart Guide
geoslamacademy.com
Charging the batteries
Plug the charger into the AC mains – the LED light
will glow green.
Plug the charger lead firmly into the battery the LED
light will change to red to indicate charging.
When the LED light changes back to green, the
battery is fully charged.
For more information, troubleshooting and
best pratice guides, visit
geoslamacademy.com
3.3.
To end the scan return
to your start location.
Press and hold the
function button until the
rotation stops.
Once the orange data
LED is o the data is
ready for download.
Datalogger
light sequence
STATUS DATA
4.4.
Once the orange Data
LED is o the data is
ready for download.
Simply insert the USB
stick
Once the green LED is
o the data is on your
USB stick and ready to
be processed. Now you
can turn the system o
(press and hold the po-
wer button) or start up a
new scan.
Datalogger
light sequence
STATUS DATA
To Next Page
Need help?
General
