EasyManua.ls Logo

Geotab GO7 - Installation Guide Manual

Geotab GO7
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Professional Installation Guide
This vehicle specific technical installation information sheet must only be used with the GO device installation
manual (https://goo.gl/rkLRiA) and is only for use by Geotab Authorised Installers. It is based on Geotab’s
suggested best practice, valid at time of publishing. There may be differences or revisions between specific vehicle
models, trim-levels, equipment or accessories made by the vehicle manufacturer and these are beyond Geotab’s
control. To ensure you have the latest available version of this document, or if you require any assistance please
contact your Authorised Reseller before proceeding with the installation.
MANUFACTURER:
Mercedes Benz
DOCUMENT DATE:
03/10/2017
MODEL &
GENERATION:
Viano
Vito
Gen 3
W447
PRODUCTION
PERIOD:
2014 - Present
T-HARNESS REQUIRED:
OPTIONAL:
SPR-INSTALLBAG
For more information on the HRN-GS16K2 harness, please refer to the technical document:
https://goo.gl/tNoQh4 or to the instructional video: UNIVERSAL VIDEO
The vehicle’s OBD-Port is located below the
steering wheel in the driver's footwell
Copyright © Geotab Inc. 2017 - All Rights Reserved | www.geotab.com | email: manuals@geotab.com
TM denotes a trademark of Geotab Inc., which may be registered in certain countries

Other manuals for Geotab GO7