⚫ Confirm the tensity of clutch cable, 4-8mm can be the general degree, out of the scope, you
have to loose locknut for adjustment, and tighten up. (see picture 9)
picture 8 picture 9
5. Gear shifting
⚫ 4 gear shifting
⚫ The way of gear changes
1) Put the throttle switch to the left (a minimum position) Gear shifting
by a clockwise rotation
2) Loose the clutch handle to make the clutch separate
Reverse(-1),Forward(1),Neutral(0),Forward(2)
To Next Page
Loading...
