EasyManuals Logo

GeoVision FETIV212-A Hardware Installation Guide

GeoVision FETIV212-A
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hardware Installation Guide
GV-Fisheye IP Dome
GV-FE2302 / 3402 / 5302 / 3403 / 5303
GV-FER3402 / 5302 / 3403 / 5303
© 2015 GeoVision Inc. All rights reserved.
Thank you for purchasing GV-Fisheye IP Camera. For advanced information on
how to use the GV-Fisheye IP Camera, please refer to GV-Fisheye IP Camera
User's Manual and Quick Start Guide online.
2015/04
English
FEV3-QG-C
61-MEFERV3-Q001
Important
Note for Connecting to GV-System / GV-VMS
The GV-Fisheye IP Camera is designed to work with GV-System / GV-VMS,
a video management system. Note the following when the camera is
connected to GV-System / GV-VMS:
1. By default, the images are recorded to the memory card inserted in the
GV-Fisheye IP Camera.
2. Once the camera is connected to GV-System / GV-VMS, the resolution
set on GV-System / GV-VMS will override the resolution set on the
camera’s Web interface. You can only change the resolution settings
through the Web interface when the connection to GV-System / GV-VMS
is interrupted.
Note for Recording
1. By default, the images are recorded to the memory card inserted in the
GV-Fisheye IP Camera. Make sure the Write recording data into local
storage option is enabled. If this option is disabled, the camera will stop
recording to the memory card while the live view is accessed through
Web browsers or other applications. For details, see Video Settings,
Administrator Chapter, GV-Fisheye IP Camera User’s Manual online.
2. Mind the following when using a memory card for recording:
Recorded data on the memory card can be damaged or lost if the
data are accessed while the camera is under physical shock, power
interruption, memory card detachment or when the memory card
reaches the end of its lifespan. No guarantee is provided for such
causes.
To avoid power outage, it is highly suggested to apply a battery
backup (UPS).
For better performance, it is highly suggested to use Micro SD card of
MLC NAND flash, Class 10.
Replace the memory card when its read/write speed is lower than 6
MB/s or when the memory card is frequently undetected by the
camera.

Other manuals for GeoVision FETIV212-A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GeoVision FETIV212-A and is the answer not in the manual?

GeoVision FETIV212-A Specifications

General IconGeneral
ModelFETIV212-A
Lens TypeFixed
Focal Length2.8 mm
IR Range30 m
Ingress ProtectionIP67
WeatherproofYes
Vandal ResistanceIK10
Operating Temperature-30°C ~ 60°C (-22°F ~ 140°F)
Power ConsumptionMax. 5.5 W
TypeFixed Dome
CategoryIP Camera
Resolution2MP
Image Sensor1/2.8" CMOS
Lens2.8mm
IR Distance30m
AudioYes
Day/NightYes
Wide Dynamic Range (WDR)120 dB
Power SupplyPoE (IEEE 802.3af) / DC 12V

Related product manuals